5702-S

INSULATION: High dielectric strength, low loss polyethylene. 22 and 20 AWG with 0.015″ nominal wall.
CONSTRUCTION: Formed by twisting 2 conductors with an uninsulated stranded tinned copper drain wire (for terminating shield). The 22 and 20 AWG pairs utilize a 22 AWG drain wire. Each pair is shielded with Mylar® supported aluminum foil, spirally wrapped. The aluminum foil is 0.00035″ thick and the Mylar® supporting film is 0.0005″ thick. Cabled round with fillers where needed with 0.001″ thick binder. Temperature rating -40° C to 80° C. Resistant to flame, moisture, and many oils and chemicals.

USES: Monitoring, data recording, and conveyance of information, such as telemetering, communication, temperature, pressure, and flow.

Mylar® is a trademark of the DuPont de Nemours Co.

Specifications

AWG Size

16

Cable O.D.

0.480 in
12.2 mm

Capacitance

67 pF / ft between one conductor & other conductor tied to shield; 35 pF mutual

Conductor

Stranded tinned soft copper

Insulation

High dielectric strength, low loss polyethylene. 18 and 16 AWG with 0.020" nominal wall.

Jacket

Black flexible PVC, -40° C to 80°

Jacket Thickness

0.040 in
1.02 mm

No. of Pairs

3

Stranding

26/30

Weight

124 lbs/1000 ft
185 kgs/km

Color Code

Chart 4

Multiple Pair Control Cable, Each Pair Shielded

5702-S

Specifications