a1049

5608-S

INSULATION: High dielectric strength, low loss polyethylene. 22 and 20 AWG with 0.015″ nominal wall.
CONSTRUCTION: Formed by twisting 2 conductors with an uninsulated stranded tinned copper drain wire (for terminating shield). The 22 and 20 AWG pairs utilize a 22 AWG drain wire. Each pair is shielded with Mylar® supported aluminum foil, spirally wrapped. The aluminum foil is 0.00035″ thick and the Mylar® supporting film is 0.0005″ thick. Cabled round with fillers where needed with 0.001″ thick binder. Temperature rating -40° C to 80° C. Resistant to flame, moisture, and many oils and chemicals.

USES: Monitoring, data recording, and conveyance of information, such as telemetering, communication, temperature, pressure, and flow.

Mylar® is a trademark of the DuPont de Nemours Co.

Specifications

AWG Size
18
Cable O.D.
0.860 in
21.8 mm
Capacitance
53 pF / ft between one conductor & other conductor tied to shield; 28 pF mutual
Conductor
Stranded tinned soft copper
Insulation
High dielectric strength, low loss polyethylene. 18 and 16 AWG with 0.020" nominal wall.
Jacket
Black flexible PVC, -40° C to 80°
Jacket Thickness
0.060 in
1.52 mm
No. of Pairs
15
Stranding
16/30
Weight
396 lbs/1000 ft
589 kgs/km
Color Code

Request Information