Home Products Military Spec Products Multiple Pair Control Cable, Each Pair Shielded 5708-S

a1049

5708-S

INSULATION: High dielectric strength, low loss polyethylene. 22 and 20 AWG with 0.015″ nominal wall.
CONSTRUCTION: Formed by twisting 2 conductors with an uninsulated stranded tinned copper drain wire (for terminating shield). The 22 and 20 AWG pairs utilize a 22 AWG drain wire. Each pair is shielded with Mylar® supported aluminum foil, spirally wrapped. The aluminum foil is 0.00035″ thick and the Mylar® supporting film is 0.0005″ thick. Cabled round with fillers where needed with 0.001″ thick binder. Temperature rating -40° C to 80° C. Resistant to flame, moisture, and many oils and chemicals.

USES: Monitoring, data recording, and conveyance of information, such as telemetering, communication, temperature, pressure, and flow.

Mylar® is a trademark of the DuPont de Nemours Co.

Specifications

AWG Size
16
Cable O.D.
0.995 in
25.3 mm
Capacitance
67 pF / ft between one conductor & other conductor tied to shield; 35 pF mutual
Conductor
Stranded tinned soft copper
Insulation
High dielectric strength, low loss polyethylene. 18 and 16 AWG with 0.020" nominal wall.
Jacket Thickness
0.065 in
1.65 mm
No. of Pairs
15
Stranding
26/30
Weight
571 lbs/1000 ft
850 kgs/km
Color Code
Chart 4

Request Information