XTPA 080
USES: XTPA 080 is a general purpose, very flexible thermoplastic adhesive tape based on a modified polyolefin. This tape will melt and flow to provide encapsulation, corrosion protection, and an environmental seal protection against moisture ingress in cable harnesses even at very low temperatures where flexibility is desired. It was developed to be used in conjunction with heat shrinkable molded shapes and tubings and can be multi-layered to any desired thickness. XTPA 080 bonds to material such as polyethylene, PVC, Neoprene®, Hypalon®, cross-linked polyolefins, and to many metals, such as steel and aluminum. XTPA 080 is cadmium and halogen free, and is supplied on a release paper to prevent layers from sticking together.
Downloads
Specifications
Chemical Resistance
Good
Corrosive Effect
Noncorrosive
Dielectric Strength (ASTM-D-257)
20 kV/mm 500 V/Mil
Elongation at Break (ASTM-D-412)
600 %
Fungus Resistance
Inert
Length Per Roll
75.0 ft
22.9 m
22.9 m
Low Temp. Flexibility (-75° C) (ASTM-D-2671C)
No cracking after bending
Operating Temperature
-75 to 80 ºC
Peel Strength - Peel Strength - Neoprene® to Neoprene®
80 N/25 mm
18 lb/in
18 lb/in
Peel Strength - PE to Aluminum
80 N/25 mm
18 lb/in
18 lb/in
Peel Strength - PE to PE
80 N/25 mm
18 lb/in
18 lb/in
Peel Strength - PVC to PVC
50 N/25 mm
11 lb/in
11 lb/in
Size
1 in
Max. Specific Gravity (ASTM-D-792)
1.0
Tensile Strength
1500 psi
Thickness
0.01 in
0.25 mm
0.25 mm
Volume Resistivity
1010 ohm/cm
Max. Water Absorption (ASTM-D-570)
0.5 %
Width
1.0 in
25 mm
25 mm
Color
Clear